PETG Snowy White 1kg - Diameter 1.75mm - Lotactree

PETG is an engineering filament widely used in FDM 3D printing, combining durability, mechanical strength and excellent print quality. Ideal for projects that require greater thermal, chemical and mechanical resistance.

Technical Specifications:

• Printing Temperature: 235°C - 255°C

• Table Temperature: 65°C - 75°C

• Density: 1.226 g/cm³ (Standard: GB/T1033)

• Melt Flow Rate (MFR): 17.9 g/10min (at 220°C/2.16Kg, Standard: GB/T3682)

• Melting Point: 70°C (Standard: GB/T1634)

• Tensile Strength: 37.558 MPa (Standard: GB/T1040)

• Elongation at Break: 11.736% (Speed of 20mm/min)

• Flexural Strength: 48.324 MPa (Standard: GB/T9341)

• Flexural Modulus: 1038.627 MPa (Speed 2mm/min)

• Impact Strength: 6.05 kJ/m² (Standard: GB/T1040)

Product Features:

1. High Durability: Excellent mechanical resistance and flexibility, ideal for functional and long-lasting parts.

2. Chemical and Thermal Resistance: Suitable for applications exposed to moderate heat, impact and chemical agents.

3. Ease of Use: High adhesion to the base and low tendency to deformation, ensuring high precision prints and dimensional stability.

4. Quality Finish: Offers a shiny, resistant surface, with high transparency in translucent versions.

5. Storage: Hygroscopic, should be kept in a dry place to avoid moisture absorption and maintain the quality of the filament.

Disclaimer:

The information above is based on tests performed by Lotactree laboratory and is intended to provide guidance on general use of the product. It does not represent a guarantee of suitability for specific applications. It is recommended that tests be performed to meet your needs. This product is protected by intellectual property rights and unauthorized reproduction is prohibited.

Choose PETG for your projects and experience an ideal balance of strength, durability and print quality!