PLA-F Blue 1kg - Diameter 1.75mm - Lotactree

PLA F for 3D Printing - FDM Application

PLA F is a high-quality filament developed for FDM 3D printers, offering superior performance and a wide range of applications. This material is produced with advanced properties, ideal for those looking for parts with greater resistance and impeccable finish.

Technical Specifications:

• Printing Temperature: 215°C - 235°C

• Table Temperature: 55°C - 65°C

• Density: 1.062 g/cm³ (Standard: GB/T1033)

• Melt Flow Rate (MFR): 21.4 g/10min (at 220°C/2.16Kg, Standard: GB/T3682)

• Melting Point: 60°C (Standard: GB/T1634)

• Tensile Strength: 44.6 MPa (Standard: GB/T1040)

• Elongation at Break: 24.2% (Speed 20mm/min)

• Impact Strength: 15.4 kJ/m² (Standard: GB/T1040)

Product Features:

1. High Quality and Resistance: Developed for applications that require greater durability and mechanical resistance, with excellent behavior in tension and impact.

2. Ease of Use: Excellent fluidity and adhesion to the base, allowing high precision printing, even on complex parts.

3. Professional Finish: Provides a detailed, high-quality surface, perfect for functional prototypes and industrial projects.

4. Limited Heat Resistance: Designed for applications below 60°C due to melting point.

5. Sustainability and Safety: Made from sustainable materials, it is an ecological option for 3D projects.

6. Proper Storage: To ensure optimal performance, store the filament in a dry place, due to its hygroscopic property.

Disclaimer:

The above specifications are based on tests conducted by Lotactree laboratory and provide general guidelines for product use. They do not constitute a guarantee of suitability for specific applications. For best results, it is recommended to perform tests based on your needs. This product is protected by intellectual property rights and its unauthorized reproduction is prohibited.

Turn your ideas into reality with PLA F and experience excellence in 3D printing!